Integrated Lighting Resources

This presentation from Michael Myer, Lighting Researcher at Pacific Northwest National Laboratory, covers energy savings potential for lighting systems integrated with HVAC and plug loads, reviewing findings from several field project case studies conducted on behalf of the U.S. Department of Energy.

The project provided a packaged solution for a retrofit of the lighting, including site survey, design, system selection, and financial assistance with materials and labor.

The city of St. Paul upgraded about 13,100 ft2 of its Street Maintenance Division building with a new networked light emitting diode (LED) lighting system integrated with heating, Ventilation, and Air Conditioning (HVAC ) and plug load controls. The city installed the lighting and plug load controls and worked with a lighting manufacturer to commission the networked lighting control system. A local HVAC controls contractor was hired to integrate the lighting with the HVAC system.

The county partnered with Slipstream–a non-profit focused on energy efficiency and climate solutions–to integrate lightemitting diode (LED) lighting with luminaire-level lighting controls (LLLCs), automatic receptacle (plug load) controls, and zoned heating, ventilation, and air conditioning (HVAC) controls in one floor of a multi-story building in downtown Minneapolis. The floor is occupied by an outpatient clinic and a fitness center; both are served by a common variable air volume (VAV) system, covering a total of 7,300 ft2.

The Minnesota Department of Transportation (MnDOT) maintains the state roads and highways in the Twin Cities Metro area from the Cedar Truck Station. Before the retrofit project, the building used outdated fluorescent lighting that over lit the building.

The University of Minnesota wanted to reduce energy costs in Jones Hall since the building had fallen behind in some of the University’s aggressive sustainability initiatives and needed new lighting and controls. The mixed-use building, one of many on campus, includes a combination of offices, classrooms, and public spaces, and is currently home to the University’s Admissions, Language Center, and College of Liberal Arts classrooms.

The California Lighting Technology Center, in collaboration with the California Energy Commission, is conducting research to develop and evaluate technology that integrates automated controls for HVAC, electric lighting and dynamic fenestration systems.

This is a case study for the Tinker Air Force Base. By replacing the existing lighting with LED fixtures, this project saved more than 60% energy compared to the existing technology. This is consistent with savings of converting either fluorescent or high-intensity discharge fixtures with either new LED fixtures or retrofit kits, which typically result in at least 45% savings. The lighting controls saved between 8-23% compared to the LED baseline. Because LEDs are very efficient, the new LED baseline uses less energy. As a result, the 20%+ savings does not result in sufficient savings for a reasonable payback. However, using lighting controls to control other building systems can make the lighting and control system more cost effective.

The Lighting Research Center investigated potential opportunities for using lighting controls to reduce HVAC energy using lighting sensors in commercial buildings. Research report conducted for the Lighting Energy Alliance. 

This presentation from Kandice Cohen, Director of Lighting Strategy at Trane Technologies, covers the reasons integrating lighting systems is beneficial, using a “Baker’s Dozen” commercial kitchen as a case study.  Kandice discusses the integration of the connected lighting control system with the building automation system and how it meets the customer’s needs.