Skip to main content

Advanced Controls, Other

Willdan Energy Solutions has a $4M grant program – Bundle-Based Energy Efficiency Technology Solutions for California (BEETS for California).  This project demonstrates three innovative bundles of pre-commercial technologies. The technology bundles for Chilled Water Plants, Office and Exterior Space LED fixtures, and Advanced laboratory ventilation were strategically developed through a systems-level approach to address the most energy-intensive areas in commercial buildings.

NextEnergy's Lighting Technology Energy Solutions (LiTES) Program, a three-year public-private partnership with the DOE, DTE, Consumers Energy, and IBEW.
The LiTES Program sought to reduce energy use in small and medium commercial buildings by accelerating the adoption of advanced/networked lighting controls (ALC/NLC) through contractor training and technology deployment. Leveraging recommendations already outlined by the Design Lights Consortium Commercial Advanced Lighting Controls (DLC CALC) project, NextEnergy led an effort to train contractors, evaluate the experience of ALC/NLC demonstration projects, identify opportunities to reduce market barriers, and accelerate the increased adoption of ALC/NLC technologies within SMCB, which represent 90% of the U.S. commercial building stock.

Advanced Controls, Report | Fact Sheet

Success with lighting controls depends on establishing clearly defined objectives and taking a disciplined approach to design and implementation. This practical guide describes four common use cases for lighting controls and outlines the implementation process, from planning through maintenance. These recommended best practices reflect the experience of practitioners and serve to reduce complexity and the likelihood of problems when installing and using lighting controls.

GSA's GPG program commissioned LBNL to assess wreless ALC at two federal sites in Northern California.  Results showed 54% normalized energy savings for GSA when fluorescent lamps with dimmable ballasts were retrofitted with wireless ALC, and 78% when the wireless ALC retrofit was coupled with LED fixtures. Wireless ALC integrated with LED fixtures is recommended for new construction and renovations, with simple payback between 3 and 6 years. It should also be considered for retrofits in facilities with minimal existing controls, high lighting energy usage, and high electricity costs.

GSA’s Green Proving Ground program recently assessed the potential of wireless sensor technology to provide a cost-effective and facilities-friendly way of helping data center operators visualize and implement system changes that reduce overall energy consumption. Findings include significant cost savings, as well as a substantial reduction in cooling load and CO2 emissions.  Sensors utilizing a wireless mesh network and data management software to capture and graphically display real time conditions for energy optimization were installed in a demonstration project.